MINI MCR-SL-U-UI-SP-NC

https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals up to 30 V, with spring-cage connection, standard configuration. Replacement part: 2902040 MINI MCR-2-UI-UI-PT. Your advantages  Power supply possible via the foot element (TBUS)  Low power consumption  Up to 12 signal combinations can be configured using DIP switches  3-way isolation  Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of 24 V or  30 V DC signals to create standard analog signals Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356043588 Weight per Piece (excluding packing) 79.600 g Custom tariff number 85437090 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C 01/02/2020   Page 1 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Number of inputs 1 Configurable/programmable Yes, unconfigured Voltage input signal 0 V ... 24 V 0 V ... 30 V max. input voltage 50 V DC Input resistance of voltage input approx. 125 kΩ (0 ... 24 V) approx. 155 kΩ (0 ... 30 V) Output data Number of outputs 1 Configurable/programmable Yes, unconfigured Voltage output signal 0 V ... 10 V 0 V ... 5 V 1 V ... 5 V 2 V ... 10 V Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Max. output voltage ≤ 12.5 V Max. output current 28 mA Short-circuit current ≤ 22 mA Load/output load voltage output > 10 kΩ Load/output load current output < 500 Ω (at 20 mA) Ripple < 20 mVPP (at 500 Ω) < 20 mVPP (at 10 kΩ) Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 19 mA (at 24 V DC incl. load) Power consumption < 450 mW Connection data Connection method Spring-cage connection Stripping length 8 mm Conductor cross section solid 0.2 mm² ... 2.5 mm² 01/02/2020   Page 2 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Technical data Connection data Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 General No. of channels 1 Maximum transmission error < 0.1 % (of final value) < 0.4 % (Without adjustment) Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.5 ms Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715. Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5% Standards and Regulations 01/02/2020   Page 3 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Technical data Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Connection in acc. with standard CUL Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Application drawing Signal conversion to uninterruptible power supply (UPS) 01/02/2020   Page 4 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Block diagram 01/02/2020   Page 5 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 ETIM 7.0 EC002653 01/02/2020   Page 6 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Classifications UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 UNSPSC 19.0 39121008 Accessories Accessories DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Marking material Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     Power module 01/02/2020   Page 7 / 8 https://www.phoenixcontact.com/gb/products/2810078 Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078 Accessories Power terminal block - MINI MCR-SL-PTB - 2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2 A     Power terminal block - MINI MCR-SL-PTB-SP - 2864147 MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/02/2020   Page 8 / 8